Guangdong Dawin Intelligent Equipment Co.,Ltd.
Contact Person: Mr. Liu
Cell phone number: +86 139-2247-7849
Tel: 0769-81889083
E-mail: info@gddawin.com
Website: mzmoz.cn
Address: Dawin Intelligent Equipment
Technology Park,Lianhe Road,Xiagang,
Chang'an Town,Dongguan City
Mechanical features:
? The optimal bed structure is designed to withstand the inertia generated by high G. It is rock solid and stable.
? The castings are treated with secondary tempering and long time natural aging treatment to ensure the stability of the castings and not easy to deform.
? Strictly in accordance with the Japanese assembly process standards, in pursuit of higher mechanical precision.
? Strictly in accordance with the Japanese assembly process standards, in pursuit of higher mechanical precision.
? Three-axis precision ball screws with small pitches are used to ensure high dynamic responsiveness.
?Standard with fully enclosed tool magazine, high stability tool changer system, fast tool change speed and higher stability.
? Adopting reasonable chip removal mechanism, it is convenient to clean up the waste chips and not easy to leak oil.
? Customised spindles for different machining requirements.
| Machine Specification | Unit | W12 |
型程 | ||
X軸行程 | mm | 1200 |
Y軸行程 | mm | 700 |
Z軸行程 | mm | 600 |
主軸端至工作臺面 | mm | 150-750 |
主軸中心至立柱滑道面距離 | mm | 800 |
導軌尺寸 | ||
X軸滑軌跨距/寬度 | mm | Box ways |
Y軸滑軌跨距/寬度 | mm | Box ways |
Z軸滑軌跨距/寬度 | mm | Box ways |
螺桿尺寸 | ||
X/Y/Z 螺桿尺寸 | mm | Φ50 |
螺距 | mm | 10 |
工作臺 | ||
工作臺尺寸 | mm | 1360*700 |
T型槽寬（寬*槽數*間距） | mm | 22*5*140 |
工作臺最大載重量 | kgs | 1300 |
主軸 | ||
主軸最高轉速 | rpm | 6000 |
主軸型式 | type | Gear Box spindle |
主軸馬力 | kw | 18.5 |
X/Y/Z 軸伺服馬達 | kw | 4.5/4.5/4.5 |
主軸端孔斜度 | type | BT50 |
主軸前端軸承 | mm | 90 |
進給速度 | ||
快速位移（X/Y/Z軸） | m/min | 15/15/16 |
切削位移速度 | m/min | 1-10 |
ATC | ||
ATC Type | Arm type | |
Tool capaticy | pcs | 24 |
Max. tool weight | kgs | 15 |
Max. knife length | mm | 300 |
Max. tool diameter | mm | 110/220 |
Recipocating time/tool change time | sec | 2.5 |
MISCEL LANEOUS | ||
Air source | kgs/cm2 | 6 |
Occupied space(LxWxH) | mm | 4850/3470/3550 |
Machine weight | kgs | 12000 |
Spindle Coolant | Manual Handle Box | Air Blower for Spindle Nose | Oil Skimmer |
Arm Type Tool Changer | Heat Exchange in Control Box | Leveling Brock | Transformer |
BED Shower | Spindle air blast system | llluminating Lamp | Pneumatic Gun |
Automatic lubrication unit | Full splashguard | Three SignalL amp | Shower Gun |
Rigid tapping | Coolant Tank and Chip Bucket | Tool box | Operating instruction |
Automatic Tool Length Measurement | Automatic Tool Break detection | Belt-type Spindle BT40/8000rpm | Disk-type Oil Skimmer |
XYZ linear scale | Automatic Chip Conveyor | Direct Drive Spindle BBT40/1 5000rpm | Automatic Power - off (M30) |
Application of through- spindle | 4th axis NC rotary table | ZF Gear Box Spindle BT 50/6000rpm | Thermal Compensation |
Voltage Regulator | Oil Mist Collector | Built-in Spindle 24000/30000rpm |
Online Consultation